Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #2: Sun Aug 24 21:10:16 BST 2008
    root@porter.dev.geeklan.co.uk:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c51000.
Preloaded elf obj module "/boot/kernel/if_rum.ko" at 0xffffffff80c51298.
Calibrating clock(s) ... i8254 clock: 1193193 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1795513878 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz (1795.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2132922368 (2034 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d4e000 - 0x000000007c288fff, 2069082112 bytes (505147 pages)
avail memory  = 2058244096 (1962 MB)
ACPI APIC Table: <INTEL  CRESTLNE>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf7670/0x0024 (v  2 DELL  )
ACPI: XSDT @ 0x0x7fed5d64/0x009C (v  1 DELL    M08     0x06040000  LTP 0x00000000)
ACPI: FACP @ 0x0x7fedeb60/0x00F4 (v  3 TOSCPL CRESTLNE 0x06040000 ALAN 0x00000001)
ACPI: DSDT @ 0x0x7fed7c3b/0x6EB1 (v  2 TOSCPL CRESTLNE 0x06040000 INTL 0x20060608)
ACPI: FACS @ 0x0x7fee2fc0/0x0040
ACPI: APIC @ 0x0x7fedec54/0x0068 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: HPET @ 0x0x7fedecbc/0x0038 (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: MCFG @ 0x0x7fedecf4/0x003C (v  1 INTEL  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: TCPA @ 0x0x7feded30/0x0032 (v  1 Intel  CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: TMOR @ 0x0x7feded62/0x0026 (v  1 PTLTD           0x06040000 PTL  0x00000003)
ACPI: OSFR @ 0x0x7feded88/0x0072 (v  1 TOSHIB A+2nd ID 0x06040000 TASM 0x04010000)
ACPI: APIC @ 0x0x7fededfa/0x0068 (v  1 PTLTD  	 APIC   0x06040000  LTP 0x00000000)
ACPI: BOOT @ 0x0x7fedee62/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
ACPI: SLIC @ 0x0x7fedee8a/0x0176 (v  1 DELL    M08     0x06040000  LTP 0x00000000)
ACPI: SSDT @ 0x0x7fed75ec/0x064F (v  1 SataRe  SataPri 0x00001000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed6f5a/0x0692 (v  1 SataRe  SataSec 0x00001000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed638c/0x025F (v  1  PmRef  Cpu0Tst 0x00003000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed62e6/0x00A6 (v  1  PmRef  Cpu1Tst 0x00003000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed5e00/0x04E6 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20061109)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Aug 24 2008 21:10:09)
acpi0: <DELL M08    > on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHC.HBUS -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 1/1 1/2 1/1 1/2 1/2 1/2 1/2 1/2 1/1 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0    5   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x0c
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a01, revid=0x0c
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2834, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[20]: type I/O Port, range 32, base 0x1800, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2835, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x283a, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf8304000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x284b, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf8300000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x283f, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2841, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2845, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2847, revid=0x03
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2830, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2831, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2832, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2836, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf8304400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2448, revid=0xf3
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2815, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2850, revid=0x03
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0x18a0, size  4, enabled
found->	vendor=0x8086, dev=0x2828, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x18f8, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x18cc, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x18f0, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x18c8, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x18e0, size  4, enabled
	map[24]: type I/O Port, range 32, base 0x18d0, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found->	vendor=0x8086, dev=0x283e, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xc8000000-0xcaffffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x10de, dev=0x0427, revid=0xa1
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xca000000, size 24, enabled
pcib1: requested memory range 0xca000000-0xcaffffff: good
	map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[1c]: type Memory, range 64, base 0xc8000000, size 25, enabled
pcib1: requested memory range 0xc8000000-0xc9ffffff: good
	map[24]: type I/O Port, range 32, base 0x2000, size  7, enabled
pcib1: requested I/O range 0x2000-0x207f: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xca000000-0xcaffffff,0xd0000000-0xdfffffff,0xc8000000-0xc9ffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1800-0x181f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1820-0x183f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf8304000-0xf83043ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf8304000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <SONiX Technology Inc Integrated Webcam, class 239/2, rev 2.00/83.04, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xc0000000-0xc3ffffff
pcib2:   prefetched decode 0xcc000000-0xcdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x4000-0x4fff
pcib3:   memory decode     0xf0000000-0xf3ffffff
pcib3:   prefetched decode 0xfa000000-0xfbffffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     6
pcib4:   subordinate bus   6
pcib4:   I/O decode        0x5000-0x5fff
pcib4:   memory decode     0xf4000000-0xf7ffffff
pcib4:   prefetched decode 0xfc000000-0xfdffffff
pci6: <ACPI PCI bus> on pcib4
pci6: domain=0, physical bus=6
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     7
pcib5:   subordinate bus   7
pcib5:   I/O decode        0x6000-0x6fff
pcib5:   prefetched decode 0xf8400000-0xf84fffff
pci7: <ACPI PCI bus> on pcib5
pci7: domain=0, physical bus=7
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0x6000, size  8, enabled
pcib5: requested I/O range 0x6000-0x60ff: in range
	map[18]: type Prefetchable Memory, range 64, base 0xf8410000, size 12, enabled
pcib5: requested memory range 0xf8410000-0xf8410fff: good
	map[20]: type Prefetchable Memory, range 64, base 0xf8400000, size 16, enabled
pcib5: requested memory range 0xf8400000-0xf840ffff: good
pcib5: matched entry for 7.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0x6000-0x60ff mem 0xf8410000-0xf8410fff,0xf8400000-0xf840ffff irq 16 at device 0.0 on pci7
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf8410000
re0: MSI count : 2
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:1c:23:
re0: [MPSAFE]
re0: [FILTER]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1840-0x185f irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf8304400-0xf83047ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf8304400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> on uhub6
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: WARNING: using obsoleted IFF_NEEDSGIANT flag
rum0: bpf attached
rum0: Ethernet address: 00:16:e6:
rum0: bpf attached
rum0: bpf attached
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     8
pcib6:   subordinate bus   8
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xf8000000-0xf80fffff
pcib6:   no prefetched decode
pcib6:   Subtractively decoded bridge.
pci8: <ACPI PCI bus> on pcib6
pci8: domain=0, physical bus=8
found->	vendor=0x1217, dev=0x00f7, revid=0x02
	domain=0, bus=8, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8000000, size 12, enabled
pcib6: requested memory range 0xf8000000-0xf8000fff: good
	map[14]: type Memory, range 32, base 0xf8002000, size 11, enabled
pcib6: requested memory range 0xf8002000-0xf80027ff: good
pcib6: matched entry for 8.5.INTA
pcib6: slot 5 INTA hardwired to IRQ 22
found->	vendor=0x1217, dev=0x7120, revid=0x02
	domain=0, bus=8, slot=5, func=2
	class=08-05-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8002800, size  8, enabled
pcib6: requested memory range 0xf8002800-0xf80028ff: good
pcib6: matched entry for 8.5.INTA
pcib6: slot 5 INTA hardwired to IRQ 22
found->	vendor=0x1217, dev=0x7130, revid=0x01
	domain=0, bus=8, slot=5, func=3
	class=01-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0102, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf8001000, size 12, enabled
pcib6: requested memory range 0xf8001000-0xf8001fff: good
pcib6: matched entry for 8.5.INTA
pcib6: slot 5 INTA hardwired to IRQ 22
fwohci0: vendor=1217, dev=f7
fwohci0: vendor=1217, dev=f7
fwohci0: <1394 Open Host Controller Interface> mem 0xf8000000-0xf8000fff,0xf8002000-0xf80027ff irq 22 at device 5.0 on pci8
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8000000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:00:c0:10:a0:00:b0:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x27c8000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:c0:00:b0:00
fwe0: bpf attached
fwe0: Ethernet address: 02:00:c0:00:b0:00
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:00:c0:10:a0:00:b0:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci8: <base peripheral> at device 5.2 (no driver attached)
pci8: <mass storage> at device 5.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18a0-0x18af at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18a0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <Intel ICH8M SATA150 controller> port 0x18f8-0x18ff,0x18cc-0x18cf,0x18f0-0x18f7,0x18c8-0x18cb,0x18e0-0x18ef,0x18d0-0x18df irq 18 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18e0
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x18d0
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x18f8
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18cc
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x18f0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x18c8
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7fed6c5a/0x0238 (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed65eb/0x05EA (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20061109)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (2605, 2341)
est0: Invalid freq 1801, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7fed6e92/0x00C8 (v  1  PmRef  Cpu1Ist 0x00003000 INTL 0x20061109)
ACPI: SSDT @ 0x0x7fed6bd5/0x0085 (v  1  PmRef  Cpu1Cst 0x00003000 INTL 0x20061109)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (2605, 2341)
est1: Invalid freq 1801, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: EcRead: failed waiting to get data
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xffffff00012596c0), AE_NO_HARDWARE_RESPONSE
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xffffff00012596c0), AE_NO_HARDWARE_RESPONSE
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132489 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750774 hz
Timecounter "TSC" frequency 1795513878 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on ICH8M chip
acd0: setting UDMA33 on ICH8M chip
acd0: <TEAC DVD+/-RW DVW28SLC/A.06> DVDR drive at ata0 as master
acd0: read 4133KB/s (4133KB/s) write 4133KB/s (4133KB/s), 2000KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable caddy, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 152627MB <SAMSUNG HM160HI HH100-11> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
battery0: battery initialization done, tried 1 times
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init